Specifications

– Size: 26cm x 38cm x 2.5cm Thick

– 6.5kg Aluminium Casting with large thermal mass

– 5 meters OD x 4mm ID diameter per 304 stainless tube

– Includes 4 mounting holes if you want to install your plate

Performance Charecteristics

With 20C ambient beer temp and flow rate through the cold plate of 300ml/10 seconds and 70% coverage of ice in contact with the cold plate you will be able to reduce the temperature of the liquid as it exits the cold plate to below 4C with a single pass through this cold plate.

If your beer is warmer than 28C we would recommend either slowing your flow rate through the cold plate or alternatively having the beverage pass through the cold plate twice.

The most common way to use this type of cold plate is to stick it into the bottom of an eksy, drill holes through the esky wall and then glue the cold plate to the floor of the esky with some polyurethane sikaflex.